Ghost Immobiliser Installation
Secure your prized possessions from car thieves by adding an immobiliser ghost. Our TASSA confirmed system safeguards vehicles from hacking, key cloning, and vehicle immobiliser bypass.
The system is hidden inside the wiring loom in your vehicle, so it is completely inaccessible to anyone who is looking. It works by generating pin code push sequences by using existing buttons on steering wheel, door cards and the centre console.
No circuit cuts
A car is a prized possession that you spend many years of effort to acquire, so it's understandable why owners want to protect their vehicle against theft. However, traditional security devices such as alarms and wheel locks could easily be snatched away or bypassed by thieves. Ghost immobilisers are extremely effective solution that works in a quiet manner and can't be identified by modern thieves.
A ghost immobiliser is also known as a hidden device is a device that communicates with your vehicle's data network CAN to disable the engine. It does this without using radio frequencies or key fobs. It communicates with your vehicle's ECU via buttons already on the steering wheel, dash and door panels, to create an individual pin code that only you are aware of. The code can be changed at any point and can be as long as 20 digits long, depending on what you prefer. It also comes with a secure emergency code that you can utilize should you forget your PIN.
The ghost immobiliser can be used to block a relay box from transferring your car key's signal from within your home, which would open the doors and begin the vehicle. It also blocks high-tech methods to steal your vehicle, including OBD port hacking. The device is small and weatherproof, which means it's difficult to see and even harder to tamper with.
The ghost immobiliser also has an advantage: it can be installed in your vehicle without leaving permanent marks. This makes it ideal for those who are planning to resell their car in the near future. It's also much faster and easier to install than an original factory-fitted system.
The Autowatch Ghost, a groundbreaking technology, is a new generation device that prevents contactless car thefts by connecting to the CAN network of a vehicle and using the existing buttons to generate an unique PIN code. It is a discreet device that can be installed without wires being cut and doesn't require any additional key fobs. It is also connected to the vehicle's original ECU and prevents thieves from bypassing it by using an additional key or replacing the ECU with the use of a "relay". This system has been verified by TASSA and can be linked with an International Security Register. Owners will be able to rest easy knowing that their vehicles are secured from theft.
No RF scanning
If you have invested a lot of time and money into the customisation of your vehicle, you will need to secure it from theft. ghost immobiliser near me to do this is to install an immobiliser, which will prevent your engine from running until you enter a unique pin code. Using the buttons on your steering wheel and dashboard, you can create an apex of 20 digits in length that is only known to you, ensuring that only you are able to drive your vehicle. You can also set up a valet and service mode that will allow you temporarily to start your car without entering the PIN code. This will permit the technician to work on your vehicle, without being present. This is a fantastic feature for those who want to cut down on time and make their lives easier.
A ghost immobiliser is a next generation device that connects to your vehicles CAN data network and utilizes the buttons on the steering wheel and dashboard to programme a personalised PIN code. It is designed to blend in with the vehicle's design, as it doesn't emit any sound or light indicator. It can be installed anywhere on your vehicle, without altering the look of the vehicle.
This stealthy gadget has been approved by TASSA and can reduce your insurance costs. It also has an ability to track your vehicle that allows you to locate your vehicle even if it has been stolen. This is helpful if you have a rare or expensive vehicle that you've invested a lot of time in personalising.
Autowatch Ghost, in conjunction with the iPhone app, allows you to remotely start your car if you have forgotten your PIN number or are not able to enter your vehicle. This feature is ideal if you have to go on errands or drop off your kids and do not want to risk having someone else drive your car. This feature is helpful if you have to take your car in for repair or service.
Another advantage of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it undetectable to thieves using RF scanning or code technology to capture codes. It can also safeguard your car from key cloning and ECU swapping as well as other common methods of car theft.
No key to cloning
Ghost immobilisers are an excellent way to safeguard top-end vehicles and stop key cloning. They prevent your car from starting until an additional PIN code is entered in conjunction with the regular key fob. This makes it extremely difficult for thieves to rob your vehicle and could discourage them from attempting it in the first place. This is a great idea if you have invested lots of time and money in making your vehicle unique or have a unique or expensive model.
These immobilisers are connected to the vehicle's CAN network and are completely hidden, which means that their presence isn't visible. It is also impossible for thieves to identify the device using radio frequency scanning or code technology for grabbing. This means that a burglar must spend much longer in order to successfully steal your vehicle.
To bypass the system thieves need to know the unique pin code and the location of the Ghost. But, the pin code will be specific to you and may be altered as many times as you want. The pin code is simple to remember, but mathematically impossible for anyone else to work out. In addition the engineer will have provided you with an emergency PIN code that can be used to bypass the pin in case you ever forget the pin.
The Ghost CAN bus immobiliser is weatherproof, and can be installed in any area of your vehicle. It works with all vehicles and can be fully customized to match your car's appearance. It is also very easy to use and cost-effective. The device can be transferred to a different vehicle, provided that it is compatible with the new vehicle.
The CAN bus immobiliser is also compatible with a variety of other security features. For instance, it can detect the damage to your vehicle and alert the owner. It can also shut off the engine if it detects that the vehicle has been tampered with. The system can also protect your vehicle from hacking and key cloning. It can also detect any vibrations or contact with the vehicle. It can also alert the owner if the vehicle is moving.
No OBD port hacking
Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, turn off your key fob, or make new keys. This technology is an enormous improvement over the traditional methods that have been used by thieves in the past to steal your car. The CAN data network also means that the system won't be affected by disconnecting or changing your battery.
The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that guards against hacking, key-cloning and theft of replica cars. It works without LED indications or key fobs, instead leveraging the buttons on your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) which must be entered prior to when you can drive your car away.
Modern thieves employ diagnostics to detect cuts in the circuit on your vehicle. They can bypass immobilisers that require a large amount of wiring or are built into the wiring. The Ghost is weatherproof, does not require additional wiring and isn't identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft systems.
Another advantage of a Ghost immobiliser is that your vehicle is only able to be started by someone who knows the PIN code and has physical access to your car. This is a significant advantage over security systems that can be bypassed by simple cable tampering or a screwdriver.
You can easily reset your PIN if you forget it by using the emergency PIN reset feature on mobile phones or computers. This is useful in the event that you have to start your car after it's left in a garage, or a valet parking service.
The Autowatch Ghost 2 has been accepted for insurance by TASSA and can be installed by our authorized installers. It features an RFID fingerprint system that allows specific components to be identified, which allows the return of stolen parts should they be found, and it can be switched into 'service mode' that will allow the engine to start when the vehicle is in a garage or using valet parking services however, you have to enter your PIN code to get out of the car.